Loading...
Loading...
How to become a licensed Fire Alarm Technician in North Dakota. Data verified 2026-03-21. Source: LicenseMap (getlicensemap.com).
Fire Alarm Technician — NICET/NFPA 72
Yes
State License Required
Not Required
NICET Required
Not Required
Practical Exam
Required
NFPA 72 Compliance
0 hrs
CE Hours
$150-$300
Total Initial Fees
Education & Training Requirements
VerifiedMinimum Education
High school diploma or equivalent recommended
Training Program
Required
System Types Covered
Fire alarm systems, low-voltage electrical systems, communication systems
Approved Programs
North Dakota State Electrical Board examination; NICET recognized but not required
Fire alarm technician education typically includes a high school diploma or GED, followed by completion of an approved fire alarm training program. Training covers NFPA 72 standards, fire alarm system design, initiating devices, notification appliances, signal processing, wiring methods, and inspection/testing procedures. Many technicians gain experience through apprenticeship programs, manufacturer training, or trade school programs. NICET (National Institute for Certification in Engineering Technologies) offers tiered certification from Level I through Level IV based on experience and examination.
NICET Certification & NFPA 72 Requirements
VerifiedNICET Certification Not Required
National Institute for Certification in Engineering Technologies
State License
Required
NFPA 72 Compliance
Required
Practical Exam
Not Required
Certification Details
North Dakota regulates fire alarm work through the Power Limited Electrical License from the State Electrical Board. This license authorizes work on low-voltage systems including fire alarms as set forth in N.D. Cent. Code 43-09-01. The State Fire Marshal enforces installation and maintenance standards but does not issue individual technician licenses.
NICET (National Institute for Certification in Engineering Technologies) is the most widely recognized certification body for fire alarm technicians in the United States. NICET Fire Alarm Systems certification is offered at four levels, with Level I covering basic installation and Level IV covering system design and project management. All fire alarm work must comply with NFPA 72 (National Fire Alarm and Signaling Code), which sets the standards for installation, inspection, testing, and maintenance of fire alarm systems. Many states accept NICET certification as a prerequisite or equivalent for state licensing.
Examination Requirements
VerifiedNICET Examination Not Required
National Certification Examination
Exam Topics
North Dakota electrical codes, NEC, fire alarm system installation, low-voltage systems
Passing Score
Must pass State Electrical Board examination
No Practical Exam Required
Hands-on/Practical Examination
The NICET Fire Alarm Systems certification exam covers NFPA 72 codes, fire alarm system design, installation standards, inspection and testing procedures, notification appliances, initiating devices, signal processing, and emergency communications systems. NICET offers four certification levels, with increasing complexity and responsibility at each tier. Some states require only Level I or II, while others may require higher levels for supervisory roles. State-specific exams may also cover local fire codes and regulations.
State Licensing Requirements
VerifiedState License Required
State-specific licensing for fire alarm technicians
State License Title
Power Limited Electrical License
Additional Notes
North Dakota regulates fire alarm work through electrical licensing.
Fire alarm technician licensing varies significantly by state. Most states require technicians to hold a state license or NICET certification to install, inspect, test, and maintain fire alarm systems. All fire alarm work must comply with NFPA 72 (National Fire Alarm and Signaling Code). States without specific licensing requirements typically enforce NFPA 72 compliance through local authorities having jurisdiction (AHJ). NICET certification is the most widely recognized national credential for fire alarm technicians.
System Types & Work Settings
VerifiedSystem Types
Fire alarm systems, low-voltage electrical systems, communication systems
Work Settings
Commercial buildings, residential properties, government buildings
Service Types
Installation, maintenance, and repair of fire alarm and low-voltage systems
Supervision Requirements
Licensed technicians work within their license scope; apprentices work under supervision
Licensed fire alarm technicians are qualified to install, inspect, test, maintain, and repair fire alarm systems in accordance with NFPA 72. System types include conventional, addressable, analog addressable, voice evacuation, mass notification, and emergency communications systems. Technicians work in commercial buildings, residential complexes, hospitals, schools, industrial facilities, government buildings, and high-rise structures. All work must comply with applicable state and local fire codes, and systems must be inspected and tested per NFPA 72 schedules.
| Fee | Amount |
|---|---|
Application Fee State Electrical Board application fee | $50-$100 |
Certification Fee Examination fee | $100-$200 |
Renewal Fee | $50-$100 |
Total Initial Fees Includes application and exam fees | $150-$300 |
Renewal & CE Requirements
VerifiedAnnual
Renewal Period
0 hrs
CE Hours Required
$50-$100
Renewal Fee
CE Details
Check with State Electrical Board for current CE requirements
Regulatory Board
Fire alarm technician licenses typically must be renewed every 2 to 3 years depending on the state. Renewal requires completion of continuing education hours covering topics such as NFPA 72 code updates, fire alarm system technology advances, inspection and testing procedures, and state regulatory changes. NICET certification renewal is separate from state license renewal and requires ongoing professional development activities or recertification examination.
Out-of-State Reciprocity
VerifiedEndorsement Available
No
Comity Available
No
Reciprocity Requirements
Because NICET certification is nationally recognized, fire alarm technicians with valid NICET credentials can often transfer their qualifications across state lines. However, states with additional licensing requirements may require separate state registration or licensing even with valid NICET certification. Technicians should verify state-specific requirements before performing fire alarm work in a new jurisdiction.
North Dakota regulates fire alarm work through its electrical licensing system rather than through the State Fire Marshal. There is no fire alarm-specific license category.
North Dakota regulates fire alarm work through electrical licensing.
Power Limited Electrical License covers fire alarm installations.
State Electrical Board administers licensing, not the State Fire Marshal.
State Fire Marshal enforces installation standards.
NICET recognized but not required at state level.
No specific fire alarm-only license exists.
There is no interstate compact for fire alarm technicians.
Explore requirements for other professional licenses in North Dakota.
How this state compares to 50 others for this profession
Timeline
#1 of 51
Salary
#26 of 51
Cost
#7 of 51
Processing
#1 of 51
Based on May 2024 Bureau of Labor Statistics OEWS data for Security and Fire Alarm Systems Installers (SOC 49-2098)
Entry Level
$52,670
25th percentile
Median
$59,230
At national averageExperienced
$63,510
75th percentile
Wage Distribution (Annual)
160 employed in this state
Source: BLS OEWS – Security and Fire Alarm Systems Installers (May 2024)
National employment projections for 2024-2034
Projected Growth
+3.5%
Average GrowthNew Jobs
+2,700
over 10 years
Annual Openings
5,500
per year (avg.)
78,300 currently employed nationwide (2024)
Source: BLS Employment Projections 2024-2034 (September 2025)
Government fees and exam costs to obtain your initial license
Note: These are government licensing fees only. Education/training program costs (tuition, books, etc.) are not included as they vary widely by institution.
Estimated total: 60–218 weeks
Timeline estimated from licensing requirements on this page.
Source: North Dakota State Fire Marshal
4 to 8 weeks after exam completion
Estimated processing time
Source: North Dakota State Fire Marshal
Study guides for NICET fire alarm systems certification.
Browse Study Guides on Amazon →As an Amazon Associate, we earn from qualifying purchases.
Shop essential tools and supplies to get started in your career.
2024-2025
Accessed 2025-03-09
Accessed 2025-03-09
North Dakota requires state licensing for fire alarm technicians. All fire alarm work must comply with NFPA 72. Licensing is managed through North Dakota State Fire Marshal and State Electrical Board.
Requirements vary by state. Always verify current requirements with your state fire marshal and NFPA.