Loading...
Loading...
Mold Inspector / Remediator
Total cost: $600-$1,200
Some details on this page are not yet confirmed against an official source. See sources below or contact the licensing board to verify.
Yes
State License Required
Separate Licenses
License Type
40 hours for assessors, 40 hours for remediators
Training Hours
No
Exam Required
Biennial (2 years) for Mold Assessor license; renewal frequency for other license types should be confirmed via DOL FAQ
Renewal Period
$600-$1,200
Total Initial Fees
State-specific mold licensing requirements
VerifiedState License Required
Yes
Mold Assessment License AND Mold Remediation License (separate licenses required)
Separate Assessment & Remediation
Yes — Separate Licenses
Conflict of Interest Prohibition
Yes — Same company cannot do both
General Contractor License Accepted
No
Mold licensing varies widely by state. Only about 11 states plus DC have specific mold licensing programs. In states with licensing, a key distinction exists between mold assessors/inspectors (who evaluate mold conditions) and mold remediators (who remove mold). Many states with licensing require separate licenses for each role and prohibit the same company from performing both assessment and remediation on a single project to prevent conflicts of interest.
Not sure if you need a mold inspector license? Check whether your state requires one.
Education, Training & Industry Certifications
VerifiedTraining Hours Required
40 hours for assessors, 40 hours for remediators
Exam Required
No
Approved Training Providers
Contact New York Department of Labor for list of approved training providers
Industry Certifications (National)
National certifications from ACAC, IICRC, and MICRO are not required by most states but are considered industry standard. These certifications demonstrate competency and are often expected by clients, insurance companies, and real estate professionals. The EPA does not regulate mold and there are no federal mold standards.
Browse Mold Inspector study materials on Amazon →(affiliate link)
Insurance Coverage for Mold Professionals
Mostly verifiedGeneral Liability
Recommended minimum $1,000,000 general liability coverage for mold professionals.
Errors & Omissions (E&O)
Errors & Omissions (E&O) insurance recommended, especially for mold assessors/inspectors providing professional opinions.
Pollution Liability
Pollution liability insurance recommended for mold remediation contractors handling hazardous materials.
Workers' Compensation
Workers' compensation insurance required in most states for employers; specific requirements vary by state.
Professional liability (E&O) insurance is particularly important for mold assessors/inspectors who provide professional opinions about mold conditions. General liability insurance ($1M+ recommended) protects against property damage claims during remediation work. Pollution liability coverage is recommended for remediators handling hazardous materials. Insurance requirements vary by state and project size.
| Fee | Amount |
|---|---|
State License Fee New York state license application fee | $200-$400 |
Certification Exam Fee National certification exam fee (ACAC, IICRC, or MICRO) — varies by certifying body | $200-$600 |
Training Cost Mold inspection/remediation training course cost — varies by provider and duration | $500-$2,000 |
Insurance (Annual) Annual insurance cost varies by coverage type, limits, and business size | $1,000-$5,000 |
Total Initial Fees Includes state license fee, training, exam, and insurance for New York | $600-$1,200 |
Use our licensing cost calculator to estimate your total investment including education and exam fees.
Calculate your licensing ROI →
See how quickly your license investment pays for itself.
Renewal Requirements & Ongoing Obligations
Mostly verifiedBiennial (2 years) for Mold Assessor license; renewal frequency for other license types should be confirmed via DOL FAQ
Renewal Period
$200-$400
Renewal Fee
Required
Continuing Education
Continuing Education Details
Not specified
Regulatory Board
In states with mold licensing, license renewal is typically annual or biennial with continuing education requirements ranging from 8-16 hours. In states without licensing, national certifications (ACAC, IICRC, MICRO) have their own renewal cycles and continuing education requirements. Maintaining current certifications and insurance is essential for credibility and compliance.
New York's mold licensing program (Article 32, effective 2016) requires 40 hours of training for both assessors and remediators — among the highest training requirements nationally. The same entity cannot perform both roles on a project.
New York enacted mold licensing under Article 32 of the Labor Law, effective January 1, 2016.
Separate licenses are required for mold assessment and mold remediation.
Mold assessors and remediators must complete 40 hours of approved training each.
The same person or company cannot perform both assessment and remediation on the same project.
Mold remediation projects must follow the NY DOL work practices.
There is no interstate compact for mold inspectors. Only approximately 10-15 states regulate mold assessment/remediation.
Mold Inspector requirements in nearby states
| State | Total Cost | Timeline | |
|---|---|---|---|
| New York (you) | $1,500-$6,300 | 4–8 wks | |
| Connecticut | $1,500-$6,300 | 4–8 wks | → |
| Massachusetts | $1,550-$6,300 | 2–6 wks | → |
| New Jersey | $1,550-$6,300 | 2–6 wks | → |
| Pennsylvania | $1,550-$6,300 | 2–6 wks | → |
See how New York compares: Mold Inspector License Fees by State — Cheapest to Most Expensive →
Compare mold inspector requirements across all states →
Mold Inspector licensing requirements nationwide →
Not sure mold inspector is right for you? Find careers that match your situation →
How does New York compare to other states for mold inspector? See the full comparison →
Calculate the return on investment for your mold inspector license →
Explore requirements for other professional licenses in New York.
Mold Inspector Schools in New York
Compare approved training programs, costs, and requirements.
Study guides for mold inspection, assessment, and remediation certification exams.
Browse Study Guides on Amazon →As an Amazon Associate, we earn from qualifying purchases.
Shop essential tools and supplies to get started in your career.
As an Amazon Associate, we earn from qualifying purchases.
Not sure this is the right career? Take a 2-minute quiz →
Answer 6 quick questions and we'll match you with the best-fit licensed profession.
Official Sources
Mold Inspector requirements in New York verified against New York State Department of Labor (NYSDOL), March 2026.
Accessed 2025-01-15
Accessed 2025-01-15
Moving to New York? Use our free Transfer Tool to see what you need →
Already licensed elsewhere? See how to transfer your Mold Inspector license to New York →
Transfer your Mold Inspector license from New York to: Connecticut → | Massachusetts → | New Jersey → | Pennsylvania → | Vermont →
New York requires a specific state license for mold professionals. Mold Assessment License AND Mold Remediation License (separate licenses required). Mold licensing information is managed through the New York State Department of Labor (NYSDOL).
Requirements vary by state. Always verify current requirements with your state licensing authority.